By Heather Jennings, PE
The wastewater treatment facility operators at a city in Missouri wanted better digester performance. They needed a better settling sludge and a higher volume of decants, as well as more room to waste sludge within their existing digesters. The options to dispose of the digested sludge were becoming more and more scarce.
After trialing 3 products, they found BIO ENERGIZER® reduced their solids the best. Significant improvement in settling as well as a significant reduction in the total solids occurred in their digesters. They have achieved up to 85% volatile solids destruction using BIO ENERGIZER®. Another benefit that the City has gained is increased decant volumes. The City has doubled the number of decants by using BIO ENERGIZER® compared with other products previously used. This all results in lower hauling and handling costs. All it takes is a peristaltic pump and the product to get you similar savings!
Click here to read the full report.
Click here for more information regarding Bio Energizer®.
Related Posts
Are You Using Wastewater Bioindicators?
By Jael Batty Water quality can be evaluated quickly, efficiently, and cost-effectively through the use of bioindicators. The presence and activities of microorganisms can indicate changes in system operations and point to the source and magnitude of an issue.1 Protozoa Approximately 4% of the microorganisms in wastewater are protozoa, which are single-celled aerobic microorganisms. Protozoa
The Water Break Podcast, Episode 29: Preventing Backflow, Part 2
“Where we bridge the gap between water plant operators and engineers” In episode 29 of the Water Break Podcast, Heather Jennings, PE, discusses fundamental water systems backflow and cross-connection issues with Gary McLaren, Marketing Director and “Backflow Nerd” at HydroCorp, based in Troy, Michigan, and Rich Davison, Engineering Sales at Soderholm & Associates in Madison,
It’s ALIVE!
by Heather Jennings, PE . . . the lagoon sludge layer, that is. I’ve seen many lagoons full of sludge, and the general attitude I find in the water industry is that the sludge layer is inert and really can only be mechanically dredged. To a certain point, that is correct: sand, soil, grit, plastics—basically
